RODER Electronics - Ultrasonic thickness

TI-007DL Data Logging Precision Ultrasonic Wall Thickness Gauge
Measuring Range : 0.15 - 25.4 mm

TI007DL

The TI-007DL is a precision ultrasonic wall thickness gauge specifically suited to make extremely precise and high-resolution measurements on thin-walled metal and plastics. It is packaged in a sturdy extruded aluminium housing which is sealed for excellent environmental protection assuring trouble-free use even in the toughest field and production environments.
The TI-007DL incorporates a built-in memory for 1000 data points that can be separated into 10 separate "batches". The stored data can be downloaded to a serial printer or a personal computer. A Windows compatible data transfer program is supplied at no additional cost.
The gauges have a MEASURING RANGE from 0.15 to 25.40 mm.
Using a single element delay tip transducer, the gauges will measure thin materials and automatically switch to interface echo mode when measuring thicker material and plastics.

FEATURES

Large, backlight LCD Display retains last readings
Resolution of 0.001 mm
Selectable units of inch or mm
RS-232C Serial output for downloading stored data to a printer or computer

TYPICAL APPLICATIONS

ocean vessels
storage tanks
sheet stock
steel structures
parts inspection
piping systems

COMPLETE KIT

The TI-007DL is supplied as a complete kit with the gauge, probe, 4 oz bottle of coupling fluid, 2 AA batteries, NIST Calibration Certificate and Operating Instruction Manual - all in a foam-fitted carrying case. kit

ACCESSORIES

Steel_test_block

Steel Test Block

Precision Machined and Finished
Includes NIST Report and Test Data
Wooden Storage Box optional

protective_holder

Protective holder

Constructed from heavy duty
Cordura Nylon
Built-in belt loop
Includes wrist and shoulder straps

cf_12

CF 12

Used to create an ultrasonic coupling between the probe and material to be measured
12 oz Bottle

calibration_certificate

Wall Thickness Calibration Certificate

DIN 55 350 Part 18, § 4.22, DIN ISO 8402 Part 1

MEASURING LIMITS

minimum radius for convex surfaces 12.7 mm
minimum radius for concave surfaces 63.5 mm
minimum headroom 33.0 mm
minimum sample diameter 12.7 mm

Single-Element Contact type probe can be fitted with a varierety of delay line tips, depending upon the application:

standard, small for very thin materials
standard, tall for thicker materials
conical, when smallest contact area is required
graphite for plastic

Specifications
RANGE	0.15 - 25.40 mm
RESOLUTION	0.001 mm
DISPLAY	4,5 -Digit, 0.5" Backlight LCD
VELOCITY RANGE	6,500-33,000 ft./sec (1250-10000 m/sec)
PROBE WEARFACE	PEEK (Polyethlethylketone)
CABLE	4 ft. (1.2 m) waterproof cable with non-polarized, quick-disconnect LEMO connectors. Optional lengths up to 100 ft. (30 m)
SERIAL OUTPUT	RS-232 C
TEMP. LIMITS	da - 30°C a 50°C
BATTERY TYPE	2 AA batteries
BATTERY LIFE	200 hours
WEIGHT	196 g / 7 ounces
DIMENSIONS	2.5 x 4.5 x 1.25 inches
GAUGE WARRANTY	5 years
PROBE WARRANTY	90 days