RODER Electronics - Ultrasonic thickness

TI-25DL
Data Logging Wall Thickness Gauge

TI25DL

Measuring Range : 0.60 - 150.0 mm

The TI-25DL accurately measures wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics from only one side.
The TI-25DL incorporates a built-in memory for 1000 data points that can be separated into 10 separate "batches". The stored data can be downloaded to a serial printer or a personal computer. A Window compatible data transfer program is supplied at no additional cost.
The gauge can be used in a Single Thickness Reading mode or in two alternative modes, the Scan mode and the Differential mode. The Scan modes permits the user to "drag" the probe over a large measuring area where the minimum thickness encountered during the scan will be displayed. The Differential mode displays the difference ("+" or "-") from a set "nominal" value.

FEATURES

RS-232C Serial output for downloading stored data to a printer or computer
Large, backlight LCD Display retains last reading
Resolution of 0.01 mm
Selectable units of inch or mm
Special-purpose probes are offered for a variety of applications
Memory for 1000 data points in up to 10 batches
Windows compatible data transfer program supplied at no additional cost

TYPICAL APPLICATIONS

ocean vessels
storage tanks
sheet stock
steel structures
parts inspection
piping systems

COMPLETE KIT

The TI-25DL is supplied as a complete kit with the gauge, probe, 4 oz bottle of coupling fluid, 2 AA batteries, data transfer software, NIST Calibration Certificate, serial output cable and Operating Instruction Manual - all in a foam-fitted carrying case. kit

ACCESSORIES

Steel_test_block

Steel Test Block

Precision Machined and Finished
Includes NIST Report and Test Data
Wooden Storage Box optional

protective_holder

Protective holder

Constructed from heavy duty
Cordura Nylon
Built-in belt loop
Includes wrist and shoulder straps

cf_12

CF 12

Used to create an ultrasonic coupling between the probe and material to be measured
12 oz Bottle

calibration_certificate

Wall Thickness Calibration Certificate

DIN 55 350 Part 18, § 4.22, DIN ISO 8402 Part 1

cable

TI-25-UW-50

50 ft. Length, waterproof
Probe/Cable assembly with non-polarized, Dual-Lemo connectors

Specifications
RANGE	0.60 - 150.0 mm
RESOLUTION	0.01 mm
DISPLAY	4,5 -Digit, 0.5" Backlight LCD
VELOCITY RANGE	6,500-33,000 ft./sec (2000-10000 m/sec)
PROBE WEARFACE	PEEK (Polyethlethylketone)
CABLE	4 ft. (1.2 m) waterproof cable with non-polarized, quick-disconnect LEMO connectors. Optional lengths up to 100 ft. (30 m)
SERIAL OUTPUT	RS-232 C
TEMP. LIMITS	da - 30°C a 50°C
BATTERY TYPE	2 AA batteries
BATTERY LIFE	200 hours
WEIGHT	196 g / 7 ounces
DIMENSIONS	2.5 x 4.5 x 1.25 inches
GAUGE WARRANTY	5 years
PROBE WARRANTY	90 days