BANNER
Home  About us  Contacts   

img
img
img
img
img
img

COMPONENTS
INSTRUMENTS

index Ultrasonic Thickness Gauges
TI-25P
TI-25M
TI-25DL
TI-25M-MMX
TI-25DL-MMX
TI-25M-UWM
TI-CMX  NEW!
TI-007
TI-007-GT
TI-007DL
TI-MVX
TI-PVX
1071-Ex
Steel Test Block
index Coating Thickness Gauge
index Stroboscopes
index Tachometers
index Digital Indicators
index Digital Thickness Gauge
index Dial Bore Gauge
index Gage Blocks
index Digital Calipers
index Digital Micrometers
index Hardness Tester
index Contour Measuring Instruments
index Profile Projectors
index Roundness Measuring Instruments
index Roughness Testers
index Height Gages
index Elaboration Software
index Distance Meters
index Temperature Meters
index Humidity Meters
index Vibration Meters
index Tension Meters
index Measure KIT
index 3D Scanner
index Vision Measuring Machines
index Coordinate Measuring Machines
index Variety
index Accessories

SYSTEMS
APPLICATIONS

OFFERS

div
engfrenchgerita
div

div
index

TI-25P
Low Cost, Ultrasonic Wall Thickness Gauge

TI25LTMeasuring Range : 1.00 - 150.0 mm

Standard configuration : in its standard configuration, the TI-25P is factory set to measure steel only.

Optional configuration : As a "no cost" option, the TI-25P can be factory set to measure on any other single material instead of steel only.

Easy upgrade to full TI-25M functionality (refer to separate data sheet). TI-25M measures on all metals, ceramics, glass and most rigid plastics. It provides Single Reading and Scan modes, where the probe is dragged over a large measuring area.
The minimum reading recorded during the "scan" is displayed.
Upgrade to TI-25M requires factory installation of enhanced circuit board, new firmware and keypad.
 

FEATURES
  • Resolution : 0.04 mm
  • The TI-25P probe is waterproof and can be submerged in water
  • Special-purpose probes are offered for a veriety of applications
  • Large, backlit LCD display retains last reading
  • Switch-seòected units for inches or mm
  • The gauge is impact-resistant and environmentally sealed to provide trouble-free operation under the toughest field conditions
  • For underwater surveyng, probe cable lengths up to 50 feet are optionally
TYPICAL APPLICATIONS
  • ocean vessels
  • storage tanks
  • sheet stock
  • steel structures
  • parts inspection
  • piping systems

KIT COMPLETO

Il TI-25P is supplied as a complete kit with the gauge, probe, 4 oz bottle of coupling fluid, 2 AA batteries, data transfer software, NIST Calibration Certificate, serial output cable and Operating Instruction Manual - all in a foam-fitted carrying case.
kit








ACCESSORIES


Steel_test_block
  • Steel Test Block
Precision Machined and Finished
Includes NIST Report and Test Data
Wooden Storage Box optional           









protective_holder
  • Protective holder
Constructed from heavy duty
Cordura Nylon
Built-in belt loop
Includes wrist and shoulder straps





cf_12
  •  CF 12
Used to create an ultrasonic coupling between the probe and material to be measured
12 oz Bottle



 


calibration_certificate
  •  Wall Thickness Calibration Certificate
DIN 55 350 Part 18, § 4.22, DIN ISO 8402 Part 1










cable
  •  TI-25-UW-50
50 ft. Length, waterproof
Probe/Cable assembly with non-polarized, Dual-Lemo connectors


Specifications
RANGE
 1.00 - 150.0 mm / 0.040 - 6.00"
RESOLUTION 0.01 mm / .004"
DISPLAY 4,5 -Digit, 0.5" Backlight LCD
VELOCITY RANGE (2000-10000 m/sec)
PROBE WEARFACE PEEK (Polyethlethylketone)
CABLE 4 ft. (1.2 m) waterproof cable with non-polarized, quick-disconnect connectors.
Optional lengths up to 100 ft. (30 m)
TEMP. LIMITS da - 20°C to 120°C
BATTERY TYPE 2 AA batteries
BATTERY LIFE 200 hours
WEIGHT 280 g 
DIMENSIONS 2.5 x 4.5 x 1.25 inches
GAUGE WARRANTY 5  years
PROBE WARRANTY 90 days







RODER Electronics - Torino - Italy - Tel. ++39 0124 34301   Fax. ++39 0124 470611    roder@roderelectronics.com
Copyright © 2003 - 2007  RODER Electronics - Markup Validation Service by W3C.org