RODER Electronics - Ultrasonic thickness

TI-25M-MMX
Through Paint Ultrasonic Wall Thickness Gauge

TI25MMMX

Pulse-Echo Mode (Pit & Flaw Detection) measures from 0.025 to 19.999 inches (0.63 to 500 mm)
Echo-Echo Mode (Through Paint & Coatings) measures from 0.1 to 1 inch (2.54 to 25.4 mm)

The TI-25M-MMX accurately measures wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics from only one side.
The TI-25M-MMX can be used in a Single Thickness Reading mode or in a Scan mode, where the probe is dragged over a large measuring area. The minimum thickness reading recorded during the "scan" will be displayed.
The TI-25M-MMX probe is waterproof and can be submerged in water. The gauge is impact-resistant and environmentally sealed to provide trouble-free operation under the toughest field conditions.

FEATURES

Large, backlight LCD Display retains last reading
Resolution of 0.01 mm
Simple operator controls virtually eliminate coatings
Special-purpose probes are offered for a variety of applications
CE Certified
For underwater surveying, probe cable lengths up to 50 feet are optionally
Switch selected units for inches or mm

TYPICAL APPLICATIONS

ocean vessels
storage tanks
sheet stock
steel structures
parts inspection
piping systems

COMPLETE KIT

The TI-25M-MMX is supplied as a complete kit with the gauge, probe, 4 oz bottle of coupling fluid, 2 AA batteries, NIST Calibration Certificate and Operating Instruction Manual - all in a foam-fitted carrying case. kit

ACCESSORIES

Steel_test_block

Steel Test Block

Precision Machined and Finished
Includes NIST Report and Test Data
Wooden Storage Box optional

protective_holder

Protective holder

Constructed from heavy duty
Cordura Nylon
Built-in belt loop
Includes wrist and shoulder straps

cf_12

CF 12

Used to create an ultrasonic coupling between the probe and material to be measured
12 oz Bottle

calibration_certificate

Wall Thickness Calibration Certificate

DIN 55 350 Part 18, § 4.22, DIN ISO 8402 Part 1

cable

TI-25-UW-50

50 ft. Length, waterproof
Probe/Cable assembly with non-polarized, Dual-Lemo connectors

MEASURING LIMITS

minimum radius for convex surfaces 12.7 mm
minimum radius for concave surfaces 63.5 mm
minimum headroom 25.00 mm
minimum sample diameter 3.8 mm

Specifications
RANGE	Pulse-Echo Mode : 0.63 to 500 mm Echo-Echo Mode : 2.54 to 25.4 mm
RESOLUTION	0.01 mm / .001"
DISPLAY	4,5 -Digit, 0.5" Backlight LCD
VELOCITY RANGE	0.0492- .3937 ft./sec (1250 -10000 m/sec)
PROBE WEARFACE	PEEK (Polyethlethylketone)
CABLE	4 ft. (1.2 m) waterproof cable with non-polarized, quick-disconnect LEMO connectors. Optional lengths up to 100 ft. (30 m)
TEMP. LIMITS	da - 20°C a 120°C
BATTERY TYPE	2 AA batteries
BATTERY LIFE	200 hours
WEIGHT	196 g / 7 ounces
DIMENSIONS	2.5 x 4.5 x 1.25 inches
GAUGE WARRANTY	5 years
PROBE WARRANTY	90 days