RODER Electronics - Coating thickness- 3000PS Series

3000PS SERIES
Coating Thickness Gauge - Pocket Model

3000PS

3 model availables :

DCF-3000PS (only Ferrous models)

DCN-3000PS (only Non-Ferrous models)

DCFN-3000PS (Ferrous and Non-Ferrous models)

Measuring Range : 0 - 1500 µm

With coating thickness gauges designed for measurement on ferrous metals, non-magnetic coatings such as varnish, paint, enamel, chrome, copper, zinc,... can be measured on steel and iron (magnetic induction method).

Coating thickness gauges for measurement on non-ferrous metals can measure all electrically insulated coatings such as varnish, paint, anodizing,... coatings on non-ferrous metals and stainless steel (eddy current method) .

The DCFN-3000PS is an exceptionally small hand-held gauge with integrated probe for fast, practical and precise coating thickness measurements.

FEATURES

Dependable accuracy over the entire range of the gauge, not just at "calibration check" points
Measures to 0.1 µm, automatically rounding off to the nearest 0.1 mil.
Keypad-selectable English or metric units
Continuous reading update detects soft coatings as probe tip "sinks" into them
Convient compact design
Longer lasting, driftless calibration....Set it and forget it for long periods of time and from job to job
Very reliable operation... Consistent, repeatable measurements
Manufacturer's certificate included

COMPLETE KIT

The 3000PS Series is supplied as a complete kit with : kit_completo

Coating thickness Gauge

zero plate

2 calibration standards

2 AAA batteries

soft carrying pouch

protective rubber shell

mini screw driver

instruction manual

Manufacturer's Certificate

ACCESSORIES
fogli_calibrazione

Calibration Standards

Calibration Foils for DCF(N)-3000 Series Instruments

Printfix

Integrated IrDA infrared interface
Archivable up to 5 years if dryly stored without UV exposure
Speed of printing : 16 lines/sec

IR Mate 210

For data transfer to a standard PC (RS232) or printer (RS232)
The IR-Mate 210 is self-powered by the RS-232 port

Specifications
GAUGE VERSIONS	DCF-3000PS ferrous metals DCN-3000PS non-ferrous metals DCFN-3000PS ferrous and non-ferrous metals
RANGE	0 - 1500 µm
ACCURACY	± 1 µm
RESOLUTION	0.0-99,9 µm 0.1 µm 100.0-249,8 µm 0.2 µm 250.0-499.5 µm 0.5 µm 500-999 µm 1 µm 1000-1998 mm 0.002 mm
DISPLAY	Back-light, 4-digit alphanumeric, digit height 10 mm
MIN. MEASURING AREA	5 mm x 5 mm
MIN. CURVATURE RADIUS	concave : 5 mm convex : 3 mm
MIN. SUBSTRATE THICKNESS	ferrous : 0.5 mm non-ferrous : 50 µm
CALIBRATION	factory calibration, zero calibration, foil calibration, offset-function : addition or subtraction of a constant value
STATISTICS PROGRAMS	number of readings, mean value, standard deviation, maximum and minimum reading of max 10000 readings
DATA OUTPUT	Infrared IrDA Standard
OPERATING TEMPERATURE	0°....50°C
SURFACE TEMPERATURE	- 15°.....60°C
STORAGE TEMPERATURE	- 20°.....60°C
POWER	2 AAA batteries, 1.5 V
DIMENSIONS	99 mm x 48 mm x 24 mm
WEIGHT	85 g
PROTECTION CLASS	IP 52 (proof against dust and dripping water)
STANDARDS	DIN, ISO, ASTM, BS