|
ODAC 15 XY-JM
High precision Dual axis measuring heads
Specially
suited for fine and extra fine wires, enamelled wires, cables, steel
cords, fibres, medical tubing, extruded plastic or rubber products.
Available for 2 measuring ranges :
- J version from 0.040 mm
- JM version from 0.015 mm
The new ODAC 15XY-JM measuring head is ideal for applications requiring precise dual axis diameter.
The
experience with laser technology, combined with high volume production
resulted in a product, offering maximum performance at minimum cost.
The unique design, high quality standards and many years of experience
resulted in a measuring head with a very high MTBF (Mean Time Between
Failure") rating, offering reliable performance and unmatched accuracy.
- Measures all extruded, drawn or ground products and materials (solid, opaque and transparent)
- Splash guard/air curtain integrated
- Extremely compact
- Fully IP 65 protected
MEASUREMENT PRINCIPLE
The measuring head scans the
object with two laser beams. These absolutely parallel laser beams
cross the measuring field perpendicularly to each other. The cast
shadows are detected electronically and converted into an electrical
signal. This signal is sent to an acquisition system.
FEATURES
- The measurement accuracy is independent of the line speed and of limited lateral oscillations of the measured object
- The measurements accuracy is not influenced by the light intensity of the environment
- Routine recalibration and zero check are unnecessary
All inspection emplacements
PCL series, all software GRAFIX series and all systems SCADEX series
can work with the laser micrometer ODAC series to fulfill numerous
functions such as :
- Product code library
- med/min/max value storage
- Closed loop process control
- Statistical report
- Real-time SPC charts
- Measurement and control of outer diameter, ovality, position
- Alarm and pre-alarm management.
- Process trend visualization
- Acquired data sharing with remote emplacements
- Historical Log of process
- Client-Server Architectures
|
| Specifications |
| DESIGNATION |
ODAC 15 XY-JM |
| MEASURING FIELD |
3 x 3 mm |
| MINIMUM OBJECT DIAMETER |
0.015 mm |
| REPEATABILITY |
± 0.25 µm (averaging time 0.1 s)
± 0.1 µm (taveraging time 1 s) |
| LINEARITY |
± 0.3 µm |
| RESOLUTION |
± 0.1 µm |
| LIGHT SOURCE |
VLD (Visible Laser Diode) |
| AMBIENT TEMPERATURE |
operating : 0....45°C
storage : -20...50°C
|
| MAX ATMOSPHERIC HUMIDITY |
95 % (non-condensing) |
| ALTITUDE |
0.....2500 m over sea level |
| PROTECTION |
IP65 |
| POWER SUPPLY |
24 V |
| POWER CONSUMPTION |
ca 6 W |
| WEIGHT |
2,05 Kg
|
|
